HOSE CLAMP

Make Enquiry

A hose clamp or hose clip is a device used to attach and seal a hose onto a fitting such as a barb or nipple. Screw/band hose clamps.

  • Perforated worm gear clamps
  • Embossed worm gear clamps
  • Constant tension clamps
  • Heavy duty clamps
  • T-bolt clamps

PERFORATED WORM GEAR CLAMPS

 

Zinc plated steel screw

zinc plated steel screw

  • Used for small diameter applications in mildly corrosive environments
  • Lightweight with a streamlined configuration, which allows for installation in tight fitting or difficult to reach areas
  • Higher sealing pressure with minimal torque
  • Per SAE standard J1508 Type “M”
  • 5/16″ (7.9 mm) band width
  • 301 Stainless Steel band and housing
  • Zinc Plated Steel slotted hex-head screw

410 SS SCREW

410-ss-screw

  • Used for small diameter applications in mildly corrosive environments
  • Lightweight with a streamlined configuration, which allows for installation in tight fitting or difficult to reach areas
  • Higher sealing pressure with minimal torque
  • Per SAE standard J1508 Type “M”
  • 5/16″ (7.9 mm) band width
  • 301 Stainless Steel band and housing
  • 410 Stainless Steel slotted hex-head screw

350 SS SCREW

350-ss-screw

  • Used for small diameter applications in mildly corrosive environments
  • Lightweight with a streamlined configuration, which allows for installation in tight fitting or difficult to reach areas
  • Higher sealing pressure with minimal torque
  • Per SAE standard J1508 Type “M”
  • 5/16″ (7.9 mm) band width
  • 301 Stainless Steel band and housing
  • 305 Stainless Steel slotted hex-head screw

316 SS SCREW

316-ss-screw

  • Used for small diameter applications in corrosive environments
  • Lightweight with a streamlined configuration, which allows for installation in tight fitting or difficult to reach areas
  • Higher sealing pressure with minimal torque
  • Per SAE standard J1508 Type “M”
  • 5/16″ (7.9 mm) band width
  • 316 Stainless Steel band and housing
  • 316 Stainless Steel slotted hex-head screw

JET QUICK CONNECT 9/16 BAND 301 SS SCREW

JET-QUICK-CONNECT-9-16-BAND-301-SS-SCREW

  • Used in aircraft and heavy duty, industrial applications that are non-corrosive
  • Permit fast and easy installation, yet can never snap open once installed
  • Four piece Quadra-Lock construction: housing orbitally riveted to saddle at 4 points providing extra strength
  • 9/16″ (14.2 mm) band width
  • 5/16″ (7.9mm) hex head screw
  • 301 Stainless Steel band and housing
  • 301 Stainless Steel slotted hex-head (H) Screw

EMBOSSED WORM GEAR CLAMPS

 

ABA MINI (S10)

aba-mini-s-10

  • Used for small, thin walled hoses
  • Rolled-up band edges and a smooth band underside protects hoses
  • Aluzinc gives three times the protection against corrosion than galvanized steel
  • Profiled band tongue for added strength
  • The nut is secured into the band to prevent loss even if the screw is removed
  • 9 mm (23/64″) band width
  • Aluzinc band and nut
  • Aluzinc slotted hex-head screw

ABA ORIGINAL (S20)

aba-original-s-20

  • Used for soft hose applications in non corrosive environments
  • Rolled-up band edges and a smooth band underside protects soft hoses
  • S20 (Aluzinc) gives three times the protection against corrosion than uncoated galvanized steel
  • High sealing pressure and high torque tolerance
  • Per SAE standard J1508 Type “FE”
  • One-piece, pressed housing
  • 12 mm (15/32″) band width
  • 7 mm slotted hex-head screw
  • S20 (Aluzinc) band
  • S20 (Aluzinc) housing – painted blue
  • S20 (Aluzinc) screw

ABA ORIGINAL (S40)

aba-original-s-40

  • Used for soft hose applications and damp environments
  • Rolled-up band edges and a smooth band underside protects softer hoses
  • S40 is more durable than S20 by withstanding corrosion in some situations
  • High sealing pressure and high torque tolerance
  • Per SAE standard J1508 Type “FE”
  • One-piece, pressed housing
  • 12 mm (15/32″) band width
  • 7 mm slotted heax-head screw
  • S40 (W4/304 SS) band and housing
  • S40 (W4/304 SS) screw

ABA ORIGINAL (S50)

aba-original-s-50

  • Used for soft hose applications and marine or low oxygen environments
  • Rolled-up band edges and a smooth band underside protects softer hoses
  • S50 is more durable than S40 by withstanding corrosion in almost all situations
  • High sealing pressure and high torque tolerance
  • Per SAE standard J1508 Type “FE”
  • One-piece, pressed housing
  • 12 mm (15/32″) band width
  • 7 mm slotted hex-head screw
  • S50 (W5/316 SS) band and housing
  • S50 (W5/316 SS) screw

ZINC PLATED STEEL SCREW

ZINC PLATED STEEL SCREW

  • Used in high tensile force applications such as temperature variant hoses
  • Rolled-up band edges and a smooth band underside protects hoses
  • Corrugated spring for automatic self-adjusting feature
  • Asymmetric extension; prevents the housing from tilting over when the clamp is tightened
  • Screw support; Ease of assembly due to the safe guidance of the emerging band end
  • Material and clamping range stamped on the band; prevention of errors
  • Per SAE standard J1508 Type “FEO”
  • Short housing saddle for level contact pressure
  • 9 mm (3/8″) band width
  • 430 Stainless Steel band

304 SS SCREW

304-ss-screw

  • Used in high tensile force applications such as temperature variant hoses
  • Rolled-up band edges and a smooth band underside protects hoses
  • Corrugated spring for automatic self-adjusting feature
  • Asymmetric extension; prevents the housing from tilting over when the clamp is tightened
  • Screw support; Ease of assembly due to the safe guidance of the emerging band end
  • Material and clamping range stamped on the band; prevention of errors
  • Per SAE standard J1508 Type “FEO”
  • Short housing saddle for level contact pressure
  • 9 mm (3/8″) band width
  • 304 Stainless Steel band
  • 304 Stainless Steel slotted hex-head Screw

TORRO 12MM 316 SS SCREW

TORRO 12MM 316 SS SCREW

  • Used in high tensile force applications such as temperature variant hoses
  • Rolled-up band edges and a smooth band underside protects hoses
  • Asymmetric extension; prevents the housing from tilting over when the clamp is tightened
  • Screw support; Ease of assembly due to the safe guidance of the emerging band end
  • Material and clamping range stamped on the band; prevention of errors
  • Per SAE standard J1508 Type “FEO”
  • Short housing saddle for level contact pressure
  • 12 mm (3/8″) band width
  • 316 Stainless Steel band
  • 316 Stainless Steel slotted hex-head Screw

CONSTANT TENSION CLAMPS

 

T-BOLT SMALL SPRING LOADED CLAMP

T-BOLT SMALL SPRING LOADED CLAMP

  • Used for industrial, marine and vehicle applications to compensate for thermal expansion of hose or fitting connections
  • B9226 – Standard duty small spring
  • Floating bridge liner
  • Per SAE standard J1508 Type “SLTB”
  • 3/4″ (19 mm) band width
  • 301 Stainless Steel Band
  • Zinc Plated Steel bolt and nylon insert locknut

T-BOLT LARGE SPRING LOADED CLAMP

T-BOLT LARGE SPRING LOADED CLAMP

  • Used for industrial, marine and vehicle applications to compensate for thermal expansion of hose or fitting connections
  • B9224 – Heavy duty large spring
  • Floating bridge liner
  • Per SAE standard J1508 Type “SLTB”
  • 3/4″ (19 mm) band width
  • 301 Stainless Steel Band
  • Zinc Plated Carbon Steel bolt and nylon insert locknut

CONSTANT TORQUE

CONSTANT TORQUE

  • Used in applications that require thermal expansion and contraction
  • Aero-Seal construction for use on smaller diameters
  • Liners are integral extensions of the band that lie true to the clamping axis
  • Monitors and then compensates for the temperature variations by changing diameter through a unique worm-gear Belleville assembly
  • Energy stored in four, compressed Belleville springs controls automatic clamp adjustment
  • Per SAE standard J1508 type “SLHD”
  • Four piece, Quadra-lock construction: housing orbitally riveted to saddle at 4 points providing extra strength
  • 301 Stainless Steel Belleville springs (four)
  • 304 Stainless Steel band and housing
  • 410 Stainless Steel hex cap screw

HEAVY DUTY CLAMPS

 

305 SS SCREW

305 SS SCREW

  • Used for small diameter applications
  • Heavy duty design for increased pressure sealing in tight fitting applications
  • Per SAE standard J1508 Type “M”
  • 5/16″ (7.9 mm) band width
  • 301 Stainless Steel band and housing
  • 305 Stainless Steel slotted hex-head screw

302 SS SCREW

302-ss-screw

  • Used in industrial, automotive and marine applications
  • High strength clamping
  • Floating bridge liner
  • Per SAE standard J1508 Type “TB”
  • 3/4″ (19 mm) band width
  • 201/301 Stainless Steel band and housing
  • 302 Stainless Steel bolt and nylon insert locknut

316 SS SCREW

316-ss-screw

  • Used in OEM or other production assembly applications in corrosive environments
  • Eight screw threads engaged simultaneously for torquing drive, sealing pressure and vibration resistance
  • Three times stronger than any other worm drive clamp
  • Per SAE standard J1508 Type “HD”
  • 5/8″ (15.8 mm) band width
  • 316 Stainless Steel Band and housing
  • 316 Stainless Steel slotted hex-head screw

BREEZE HI TORQUE (410 SS)

breeze-hi-torque-410-ss

  • Used in OEM or other production assembly applications
  • Single piece band is extended underneath the adjustment slots to protect silicone or other soft-surface materials
  • Eight screw threads engaged simultaneously for torquing drive, sealing pressure and vibration resistance
  • Three times stronger than any other worm drive clamp
  • Per SAE standard J1508 Type “HD”
  • 5/8″ (15.8 mm) band width
  • 304 Stainless Steel Band
  • 410 Stainless Steel slotted hex-head screw

BREEZE V-BAND (302 SS)

breeze-v-band-302-ss

  • Used to secure coupling for connecting flanged joints
  • Available in standard and custom diameter and V segments.
  • T-Bolt design
  • Bandwidth varies from clamp to clamp depending on application
  • 302 Stainless Steel band
  • 305 Stainless Steel bolt and locknut

T-BOLT CLAMPS

 

BREEZR T-BOLT

breezer-t-bolt

  • Used in industrial, automotive and marine applications
  • High strength clamping
  • Floating bridge liner
  • Per SAE standard J1508 Type “TB”
  • 3/4″ (19 mm) band width
  • 201/302 Stainless Steel band and housing
  • Zinc Plated Steel bolt and nylon insert locknut

Applications

  • Automotive
  • Power Generation
  • Petrochemicals
  • Fluid Power
  • Instrumentation
  • Chemicals & Fertilizer Plants
  • Electronics
  • Filtration
  • Pharmaceuticals
  • Hydraulic Fittings
  • Hydraulic Cylinders
  • Pneumatic Cylinders
  • Valves and Pumps
  • Plumbing Products
  • Dairy/Food Processing
  • Earthmoving & Construction Equipment

Seals

Assorted Boxes

Couplings & Elements

Belts & Pulleys

Bearings

Hose Clamp

Carbon Products

Gasket & Gasket Sheets

Molded And Extruded Rubber Products

PTFE Products

Bellows

Thermoplastics

Precision Balls

Anti Explosive Decompression

Mechanical Face Seals

Orings

Springs

Our Brochure

View our new brochure for an easy to read guide on all the products we offer.

Download .PDF